Three-dimensional printed custom-made modular talus prosthesis in patients with talus malignant tumor resection.

BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.

Evaluation of the functional and radiologic outcomes in talus fractures following surgery.

OBJECTIVE: The long-term outcome of talus fractures is not yet sufficiently favorable despite improved resources and growing experience. With increasing fracture severity, the complication rate increases. This study aimed to evaluate the mid-to-long-term clinical and radiologic outcomes using the scoring system and imaging archive in patients with talus fractures who were surgically treated in our hospital. PATIENTS AND METHODS: The mid- to long-term outcomes of patients with talus fractures admitted to Aydin Adnan Menderes University Faculty of Medicine Hospital between January 2010 and December 2020 and treated surgically were analyzed using satisfaction and functional scoring systems. RESULTS: Demographic data of the patients enrolled in our study indicated that talus fractures primarily developed in young males (p<0.05). The scores obtained from American Orthopaedic Foot & Ankle Society (AOFAS) scoring were consistent with patients' long-term consequences, such as avascular necrosis and post-traumatic arthritis (p<0.05). The rates of avascular necrosis and post-traumatic arthritis were lower, whereas AOFAS scores were higher in patients in whom the reduction quality was within the exact anatomical limits (p<0.05). The Hawkins sign had a positive predictive significance in patients free of avascular necrosis (p<0.05). Higher AOFAS scores were observed in patients treated with a single surgical incision (p<0.05). The timing of the surgery did not influence the results (p>0.05). CONCLUSIONS: The outcomes of patients treated surgically for talus fracture depended on the quality of reduction. In the mid-to-long term, the satisfaction scores of our patients with talus fractures who had undergone surgical treatment were rated as moderate.

Talonavicular-cuneiform arthrodesis in the management of Mueller-Weiss Syndrome: a retrospective case series.

Mueller-Weiss Syndrome (MWS), characterized by spontaneous adult-onset tarsal navicular osteonecrosis, is an uncommon cause of chronic midfoot pain that can lead to functional impairment and progressive deformities. This study aimed to present clinical and radiological outcomes of talonavicular-cuneiform (TNC) arthrodesis in the treatment of patients with MWS. A retrospective study was performed on 8 consecutive patients (6 female, 2 male; mean age = 50 years; range = 33-64) who underwent TNC arthrodesis using plate fixation with autologous bone grafting for the treatment of MWS. To evaluate clinical status, the American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Midfoot Score was performed immediately preoperatively and at the final follow-up. In radiographic evaluation, talus-first metatarsal angle (Meary's angle) was measured preoperatively and at the final follow-up. Solid fusion was also examined on postoperative radiographs and computerised tomography. The mean follow-up was 35 months (range = 24-52). The mean AOFAS improved from 37 (range = 24-53) preoperatively to 85 (range = 80-93) at the final follow-up (p < 0.001). No major intra- operative complications were observed in any of the patients. According to the Maceira and Rochera radiological staging system, 5 feet was stage 3, and 3 feet was stage 4. The mean union time was 10 months (range = 5-15). Radiographic solid fusion was achieved in all but one foot that developed talonavicular non-union. TNC arthrodesis using plate fixation with autologous bone grafting seems to be an effective surgical method for reconstruction of MWS.

Different radius of curvature at the talus trochlea from northern Chinese population measured using 3D model.

BACKGROUND: To analyze the curvature characteristics of the talus trochlea in people from northern China in different sex and age groups. METHODS: Computed tomography scanning data of talus from 61 specimens were collected and constructed as a three-dimensional model by Materialise's Interactive Medical Image Control System(MIMICS) software, anteromedial(AM), posteromedial(PM), anterolateral(AL), and posterolateral(PL) edge, anterior edge of medial trochlea, posterior edge of medial trochlea and anterior edge of lateral trochlea were defined according to the anatomical landmarks on trochlear surface. The curvature radii for different areas were measured using the fitting radius and measure module. RESULTS: There were significant differences among the talus curvatures in the six areas (F = 54.905, P = 0.000), and more trends in the analytical results were as follows: PM > PL > MP > AL > MA > AM. The average PL radius from specimens aged > 38 years old was larger than that from specimens aged < = 38 years (t=-2.303, P = 0.038). The talus curvature of the AM for males was significantly larger than that for females (t = 4.25, P = 0.000), and the curvature of the AL for males was larger than that for females (t = 2.629, P = 0.010). For observers aged < = 38 years, the AM curvature of the right talus in the male group was significantly larger than that in the female group (P < 0.01). In age < = 38years group, the MA curvature of right talus in male was significantly larger than in female group(P < 0.01), fitting radius of talus for male (21.90 ± 1.97 mm) was significantly greater than female of this(19.57 ± 1.26 mm)(t = 6.894, P = 000). The average radius of the talus in the male population was larger than that in the female population. CONCLUSION: There was no significant relationship between age and talus curvature for males and females. The radius of curvature in the posterior area was significantly larger than that in the anterior area. We recommend that this characteristic of the talus trochlea should be considered when designing the talus component in total ankle replacement (TAR).

Osteochondral Lesions of the Talus: Etiology, Clinical Presentation, Treatment Options, and Outcomes.

This article reviews the etiology, clinical presentation, classification schemes, and treatment options for osteochondral lesions of the talus. These lesions typically occur after a traumatic injury and are best diagnosed on MRI. Asymptomatic lesions and incidentally found lesions are best treated conservatively; however, acute displaced osteochondral fragments may require surgical treatment. Lesion characteristics may dictate surgical technique. Outcomes following surgical treatment may be impacted by patient age, BMI, and lesion characteristics.

Effects of added trunk load on the in vivo kinematics of talocrural and subtalar joints during landing.

BACKGROUND: Landing from heights is a common movement for active-duty military personnel during training. And the additional load they carry while performing these tasks can affect the kinetics and ankle kinematic of the landing. Traditional motion capture techniques are limited in accurately capturing the in vivo kinematics of the talus. This study aims to investigate the effect of additional trunk load on the kinematics of the talocrural and subtalar joints during landing, using a dual fluoroscopic imaging system (DFIS). METHODS: Fourteen healthy male participants were recruited. Magnetic resonance imaging was performed on the right ankle of each participant to create three-dimensional (3D) models of the talus, tibia, and calcaneus. High-speed DFIS was used to capture the images of participants performing single-leg landing jumps from a height of 40 cm. A weighted vest was used to apply additional load, with a weight of 16 kg. Fluoroscopic images were acquired with or without additional loading condition. Kinematic data were obtained by importing the DFIS data and the 3D models in virtual environment software for 2D-3D registration. The kinematics and kinetics were compared between with or without additional loading conditions. RESULTS: During added trunk loading condition, the medial-lateral translation range of motion (ROM) at the talocrural joint significantly increased (p < 0.05). The subtalar joint showed more extension at 44-56 ms (p < 0.05) after contact. The subtalar joint was more eversion at 40-48 ms (p < 0.05) after contact under the added trunk load condition. The peak vertical ground reaction force (vGRF) significantly increased (p < 0.05). CONCLUSIONS: With the added trunk load, there is a significant increase in peak vGRF during landing. The medial-lateral translation ROM of the talocrural joint increases. And the kinematics of the subtalar joint are affected. The observed biomechanical changes may be associated with the high incidence of stress fractures in training with added load.

Three-dimensional Mapping Analysis of Talus Fractures and Demonstration of Different Surgical Approaches for Talus Fractures.

OBJECTIVE: The talus is an important component in the ankle, and its treatment after injury is crucial. However, complications and adverse events due to incomplete traditional classifications may still occur, and these classifications fail to analyze the patterns and distribution of fractures from a three-dimensional perspective. Therefore, in this study, we aimed to analyze the location and distribution of fracture lines in different types of talus fractures using three-dimensional (3D) and heat mapping techniques. Additionally, we aimed to determine the surface area of the talus that can be utilized for different approaches of internal fixation, aiding in the planning of surgical procedures. METHODS: We retrospectively analyzed data from CT scans from 126 patients diagnosed with talus fractures at our two hospitals. We extracted the CT data of a healthy adult and created a standard talus model. We performed 3D reconstruction using patients' CT images and superimposed the fracture model onto the standard model for drawing fracture lines. Subsequently, we converted the fracture lines into a heat map for visualization. Additionally, we measured 20 specimens to determine the boundary for various ligaments attached to the talus. We determined the surface area of the talus available for different surgical approaches by integrating the boundary data with previously reported data on area of exposure. RESULTS: Without considering the displacement distance of the fracture, fracture types were classified as follows, by combining Hawkins and Sneppen classifications: talar neck, 41.3%; posterior talar tubercle, 22.2%; body for the talus and comminuted, 17.5%; lateral talar tubercle, 11.9%; and talar head, 7.1%. We established fracture line and heat maps using this classification. Additionally, we demonstrated the available area for anteromedial, anterolateral, posteromedial, posterolateral, and medial malleolus osteotomy and Chaput osteotomy approaches. CONCLUSION: Fracture line and heat map analyses can aid surgeons in planning a single or combined surgical approach for the reduction and internal fixation of talus fractures. Demonstrating the different surgical approaches can help surgeons choose the most effective technique for individual cases.

Radiographic Analysis of Valgus Ankle Deformity With or Without Medial Longitudinal Arch Collapse.

BACKGROUND: Establishing a surgical plan for ankle deformities necessitates a comprehensive understanding of the deforming forces involved, and the morphology of the ankle deformity plays an important role as well. Valgus tibiotalar tilt development has mostly been described in patients with a low medial longitudinal arch, as seen in progressive collapsing foot deformity (PCFD). However, some valgus ankles demonstrate no radiographic evidence of a collapsed medial arch. This study aims to investigate whether there are differences in the radiographic morphology of valgus ankle deformities between patients with and without a low medial longitudinal arch to explore if they have different etiologies. METHODS: We retrospectively reviewed patients who underwent surgical treatment for asymmetric valgus ankle deformity at our institution between 2017 and 2021. Patients with a valgus tibiotalar tilt (TT) greater than 4 degrees and Meary angle greater than 30 degrees (mean: 38.9) were included in the PCFD group (n = 29). The non-PCFD group (n = 24) with TT greater than 4 degrees and Meary angle less than 4 degrees (mean: 0.3) was also established. In the weightbearing ankle anteroposterior view, the TT and medial distal tibial angle were measured. Additionally, to assess the mediolateral position of the talus, the talar center migration (TCM) and lateral talar dome-plafond distance (LTD-P) ratio in the coronal plane were measured. In weightbearing computed tomography (WBCT), the degree of axial plane talocalcaneal subluxation and the prevalence of sinus tarsi bony impingement were assessed. Intergroup comparison was conducted. RESULTS: Both groups demonstrated a similar degree of TT, with a mean of 11.6 degrees in the PCFD group and 13.7 degrees in the non-PCFD group (P = .2330). However, the PCFD group showed a significantly greater TCM and LTD-P ratio compared with those of the non-PCFD group (P < .0001), indicating that PCFD patients have a more medially translated talus in ankle anteroposterior radiographs. WBCT showed that the PCFD group on average had 18 degrees greater axial plane talocalcaneal subluxation (P < .0001) and 52% higher prevalence of sinus tarsi bony impingement (P = .0002) compared with the non-PCFD group. CONCLUSION: This study suggests that valgus ankles may exhibit different radiographic morphologies depending on the status of the longitudinal arch. Valgus ankles in PCFD patients tend to have a more medially translated talus. This finding may suggest the presence of different deforming forces between the 2 groups and may indicate the need for different treatment strategies to address talar tilt. LEVEL OF EVIDENCE: Level III, case-control.

The role of imaging in the diagnosis, staging, and management of the osteochondral lesions of the talus.

Osteochondral lesions of the talus (OLT) represent an abnormality of the articular cartilage and sub-chondral bone. The abnormality is typically associated with trauma though the exact aetiology remains unknown. Multiple staging systems have been developed to classify the abnormality and management can vary from conservative treatment to different surgical options. Early diagnosis is essential for optimal outcome and all imaging modalities have a role to play in patient management. The aim of this article is to review the pathology, classification, multimodality imaging appearances of OLT, and how the imaging affects patient management.

The Influence of Talar Displacement on Articular Contact Mechanics: A 3D Finite Element Analysis Study Using Weightbearing Computed Tomography.

BACKGROUND: Talar displacement is considered the main predictive factor for poor outcomes and the development of post-traumatic osteoarthritis after ankle fractures. Isolated lateral talar translation, as previously studied by Ramsey and Hamilton using carbon powder imprinting, does not fully replicate the multidirectional joint subluxations seen in ankle fractures. The purpose of this study was to analyze the influence of multiple uniplanar talar displacements on tibiotalar contact mechanics utilizing weightbearing computed tomography (WBCT) and finite element analysis (FEA). METHODS: Nineteen subjects (mean age = 37.6 years) with no history of ankle surgery or injury having undergone WBCT arthrogram (n = 1) and WBCT without arthrogram (n = 18) were included. Segmentation of the WBCT images into 3D simulated models of bone and cartilage was performed. Three-dimensional (3D) multiple uniplanar talar displacements were simulated to investigate the respective influence of various uniaxial displacements (including lateral translation, anteroposterior translation, varus-valgus angulation, and external rotation) on the tibiotalar contact mechanics using FEA. Tibiotalar peak contact stress and contact area were modeled for each displacement and its gradations. RESULTS: Our modeling demonstrated that peak contact stress of the talus and tibia increased, whereas contact area decreased, with incremental displacement in all tested directions. Contact stress maps of the talus and tibia were computed for each displacement demonstrating unique patterns of pressure derangement. One millimeter of lateral translation resulted in 14% increase of peak talar contact pressure and a 3% decrease in contact area. CONCLUSION: Our model predicted that with lateral talar translation, there is less noticeable change in tibiotalar contact area compared with prior studies whereas external rotation greater than 12 degrees had the largest effect on peak contact stress predictions. LEVEL OF EVIDENCE: Level V, computational simulation study.

Primary total talus arthroplasty for Hawkins type IV talar neck fracture dislocation.

A woman in her 40s was involved in a motor vehicle collision and sustained a closed Hawkins type IV talar neck fracture dislocation. The injury was treated with reduction, percutaneous pinning and spanning external fixation, followed by definitive treatment with total talus arthroplasty (TTA) 2 months following injury. This is a unique example of definitive management for a severe talar neck fracture dislocation with arthroplasty in the subacute setting. TTA is perhaps a primary option for these injuries at high risk for avascular necrosis, non-union, malunion and post-traumatic arthritis.

Bilateral Os Trigonum Fracture Treated With Simultaneous Posterior Ankle Arthroscopy.

This is a case report of a 21-year-old female undergraduate student who sustained bilateral ankle injuries while jumping from a moving van wearing 3-inch high heel shoes. Upon initial presentation, her injury was treated conservatively as an acute bilateral ankle sprain for 6 weeks. However, the patient reported no improvement of pain and remained unable to self-ambulate. Bilateral MRI and CT scans of both ankles demonstrated bilateral os trigonum fractures. She underwent bilateral posterior ankle arthroscopic débridement of both os trigonum. At the postoperative 36-month follow-up, the patient reported notable improvement of all functional outcomes (36-item Short Form survey and Foot and Ankle Ability Measure), reported return to the same level of sports activities, and experienced no pain (visual analog scale) on either ankle. This is the first report in the literature of bilateral os trigonum fracture treated with simultaneous posterior ankle arthroscopic débridement.

Talar neck rotation angle in adults with clubfoot deformity: Observed values and intra- and inter-observer reliability using weightbearing CT.

INTRODUCTION: Adults presenting with symptomatic clubfoot represent a challenging cohort of patients. An appreciation of the location and degree of deformities is essential for management. Talar anatomy is often abnormal with varus within the talar neck, however, there are few reproducible methods which quantify talar neck deformity in adults. We describe a technique of assessing talar neck deformity, and report on observed values and intra- / inter-observer reliability. METHODS: This was a single-centre, retrospective study including 96 feet from 56 adult patients with clubfeet (82 feet had clubfoot deformity, 14 were normal). Mean age was 34.3 ± 16.9 years and 31 (55.3%) were male. Weight-bearing CT scans captured as part of routine clinical care were analysed. Image reformats were oriented parallel to the long axis of the talus in the sagittal plane. In the corresponding axial plane two lines were drawn (on separate slices): 1) a line perpendicular to the intermalleolar axis, 2) a line connecting the midpoints of the talar head and narrowest part of the talar neck. The talar neck rotation angle (TNR angle) was the angle formed between these lines. Intraclass correlation coefficients (ICC) were performed for intra- and inter-observer reliability. RESULTS: Mean TNR angle in clubfeet was 27.6 ± 12.2 degrees (95%CI = 25.0 to 30.2 degrees). Mean TNR angle in normal feet was 18.7 ± 5.1 degrees (95%CI = 16.0 to 21.4 degrees) (p < 0.001). The ICC for clubfeet was 0.944 (95%CI = 0.913 to 0.964) for intra-observer agreement, and 0.896 (95%CI = 0.837 to 0.932) for inter-observer agreement. CONCLUSION: This measurement technique demonstrated excellent intra- and inter-observer agreement. It also demonstrated that compared to normal feet, clubfeet had about 9 degrees of increased varus angulation of the talar neck. This technique and data may be used for future research into clubfoot deformity and in planning treatment. LEVEL OF CLINICAL EVIDENCE: 3.

Outcomes following total ankle total talus replacement: A systematic review.

BACKGROUND: Prosthetic substitution of the talus presents a significant challenge to the foot and ankle surgeon. The shear and compressive forces on the talus and its tenuous blood supply lead to high rates of avascular necrosis and eventual talar collapse. The purpose of this systematic review is to evaluate whether total ankle total talus replacement (TATTR) leads to improved clinical and radiographic outcomes with appropriate safety metrics in patients with a history of avascular necrosis or significant trauma. METHODS: We searched the concepts of talus, prosthesis, and arthroplasty in MEDLINE (PubMed), Embase (Elsevier), CINAHL Complete (EBSCOhost), and Scopus (Elsevier) from the database's inception through March 9, 2023. Inclusion Criteria were 1) previous trauma to the talus, 2) post-traumatic arthritis to the tibiotalar joint, 3) avascular necrosis of talus, 4) multiple failed prior interventions, 5) degenerative osteoarthritis to the tibiotalar joint, and 6) inflammatory arthropathy to tibiotalar joint. Patients less than 18 years of age and manuscripts in non-English languages were excluded. RESULTS: Of the 7625 references, 16 studies met the inclusion criteria, yielding data from 136 patients (139 ankles). The studies varied in design, with case reports and retrospective case series being predominant. The overall weighted average modified Coleman Methodology Score (mCMS) was 70.4 out of 100, indicating moderate flaws in study design that may be subject to various forms of bias and possible confounders. Demographics showed a diverse range of etiologies, with alumina ceramic being the primary prosthesis material. Functional scores demonstrated improvements in dorsiflexion and plantarflexion, although patient-reported outcome measures (PROs) were inconsistently reported. Complications included fractures, heterotopic ossification, prolonged wound healing, and infections. Revision details were sparsely reported. CONCLUSION: TATTR is a promising treatment modality for improving short-term functional outcomes for patients with avascular necrosis or trauma-related issues. However, this systematic review underscores the need for standardized reporting, longer-term follow-ups, and further research to establish the procedure's efficacy and safety, particularly in comparison to other treatment modalities. LEVEL OF EVIDENCE: III, Systematic Review of Level IV Studies.

Os Trigonum Syndrome: A Cause of Posterior Ankle Pain.

BACKGROUND: Os trigonum syndrome represents a cause of posterior ankle pain that is predominantly seen in athletes. The os trigonum ossicle forms from a secondary ossification center of the talus and is located at its posterior aspect in an interval between the posterior lip of the tibial plafond and calcaneus. The os trigonum ossicle is often an incidental finding and asymptomatic. However, repetitive plantarflexion and push-off maneuvers can cause symptoms and lead a patient to pursue orthopedic care. MATERIALS AND METHODS: A review of the literature was conducted using the PubMed search engine with the following keywords: "os trigonum", "os trigonum ossicle", "os trigonum syndrome", "posterior ankle impingement", and "Stieda process". RESULTS: The pertinent anatomy, clinical presentation, diagnostic evaluation, and treatment of os trigonum syndrome were reviewed in the literature and are extensively discussed in this article. CONCLUSION: Os trigonum syndrome represents a potential cause of posterior ankle pain that needs thorough evaluation regarding history, physical examination, and imaging. Once diagnosed, treatment ranges from conservative to surgical interventions depending on surgeon preference and specific case presentation. [Orthopedics. 2024;47(2):e67-e72.].

The Use of the Lateral Tibial Line to Assess Ankle Alignment: A Preliminary Investigation.

BACKGROUND: Although the medial clear space (MCS) is commonly used to assess talar alignment and ankle stability, its measurement is variable with multiple reported normal values. We have observed that the lateral tibial shaft is a reliable landmark to assess talar alignment. The objective of the current investigation was to determine the normal relationship of the lateral tibia to the superolateral talus using a tangent drawn inferiorly from the lateral tibial shaft, which we refer to as the "lateral tibial line" (LTL). METHODS: The relationship of the LTL to the superolateral talus was assessed by three reviewers on 99 standing ankle mortise radiographs in uninjured patients. This relationship was quantified by measuring the distance (in millimeters) between the LTL and the superolateral talus. In addition, the interobserver reliability of the LTL measurement was recorded and compared with that of the MCS. RESULTS: The median value for the distance between the superolateral talus and LTL was -0.50 mm with an interquartile range of -1.4 to 0.0 mm. The LTL was within 1 mm of the lateral talus in 176 of 297 reviewer measurements (59.3%). Moreover, it was either lateral to or at most 1 mm medial to the lateral talus in 90.9% of cases. The LTL measurement also demonstrated good interobserver reliability (0.764, 95% confidence interval, 0.670 to 0.834), similar to the measurement of MCS (0.742, 95% confidence interval, 0.539 to 0.846). CONCLUSIONS: The relationship between the LTL and superolateral talus is easily measured with good reliability for assessing the anatomic relationship of the tibia and talus. The LTL uncommonly fell more than 1 mm medial to the superolateral talus, as might be seen with displaced ankle fractures. These findings will hopefully serve as a basis for future studies evaluating its role in assessing lateral displacement and stability of isolated fibula fractures. LEVEL OF EVIDENCE: Level III, retrospective review.

The developing juvenile talus: Radiographic identification of distinct ontogenetic phases and structural trajectories.

Trabecular bone architecture in the developing skeleton is a widely researched area of bone biomechanics; however, despite its significance in weight-bearing locomotion, the developing talus has received limited examination. This study investigates the talus with the purpose of identifying ontogenetic phases and developmental patterns that contribute to the growing understanding of the developing juvenile skeleton. Colour gradient mapping and radiographic absorptiometry were utilised to investigate 62 human tali from 38 individuals, ranging in age-at-death from 28 weeks intrauterine to 20 years of age. The perinatal talus exhibited a rudimentary pattern comparable to the structural organisation observed within the late adolescent talus. This early internal organisation is hypothesised to be related to the vascular pattern of the talus. After 2 years of age, the talus demonstrated refinement, where radiographic trajectories progressively developed into patterns consistent with adult trabecular organisation, which are linked to the forces associated with the bipedal gait, suggesting a strong influence of biomechanical forces on the development of the talus.